Trailer mounted acidification pumper is widely used for oil well
stimulation. In sandstone formations, the acids help enlarge the pores,
while in carbonate formations, the acids dissolve the entire matrix.
Acidizing
Acidizing refers to the stimulation of a
reservoir formation by pumping a solution containing reactive acid to improve
the permeability and enhance production of a well. Acidizing can be divided
into two categories:
1. Matrix acidizing: it is mostly used in
sandstone formations. With trailer mounted acidification pumper, acid is pumped
into a well at low pressures, dissolving sediments and mud solids, increasing
the permeability of the rock, enlarging the natural pores, and stimulating the
flow of oil and gas.
2. Fracture acidizing: it is mostly used in
carbonate formations. It involves pumping acid at higher pressures, but still
lower than those used during fracking. The acids fracture the rock, allowing
for the flow of oil and gas.
Features
1. Acid Transport Trailers
2. Tandem or Tridem units
3. Tanks Constructed of FRP (Fibre Glass)
4. Single or Multi-Compartment Staging
5. Electronic Float Level Gauges
6. DOT Compliant
High-Pressure 600 HP Trailer Mounted Acidification Pumper
1. Tandem Axle Tractor
2. 600 Hp Cummins Diesel Engine
3. 70 Mpa (10,000 Psi) Pressure Rating Long
Stroke Pump
4. Integral Treating Iron
5. Deep Reduction Transmission for Low Pump
Rates10 L/min to1,000 L/min (2.6 gal/min to265
gal/min)
6. Twin Stainless Steel4.2 m
3(1,110 gallons) Total
Displacement Tanks
7. Electronic Recording Package for Rate,
Volume and Pressure
8. Chemical Transfer Pump Product Loading
9. Climate Controlled, Enclosed Operator
Cabin
10. Remote Operations Control Panel
11. Full Complement of Required Safety
Equipment
12. Two-Way Radio Communications